उत्पादों

घर > उत्पादों > डीसी इन्वर्टर वीआरएफ > Wall Mounted VRF Unit CE Certified Gold Fin Residential Commercial HVAC The Wall-Mounted Unit That Installs Like a Ducted One Looks Like One

श्रेणियां

दीवार पर लगाए गए स्प्लिट यूनिट

(8)

परिशुद्धता एयर कंडीशनर

(2)

पैकेजिंग विवरण

पैकेजिंग विवरण: Miss. LISA

टेलीफोन: 86--19068528348

अब संपर्क करें

हमें मेल करें

Wall Mounted VRF Unit CE Certified Gold Fin Residential Commercial HVAC The Wall-Mounted Unit That Installs Like a Ducted One Looks Like One

उत्पाद विवरण

उत्पत्ति के प्लेस: चीन

ब्रांड नाम: OEM; MIDEA

प्रमाणन: CB, ISO

भुगतान और शिपिंग शर्तें

सबसे अच्छी कीमत प्राप्त करें

उत्पाद विवरण

उत्पाद वर्णन

प्रमुखता देना: 
                                                                                                                                                                                                                                                                                Wall Mounted VRF Unit CE Certified, Residential Commercial HVAC unit, DC Inverter VRF with warranty
                              

प्रोडक्ट का नाम:	दीवार पर चढ़ा हुआ	क्षमता सीमा:	2.2-7.1 किलोवाट
न्यूनतम ध्वनि स्तर:	27 डीबी ((ए)	वैकल्पिक पंप हेड:	1,200 मि.मी
शीतल:	R32 निम्न GWP (GWP 675, F-गैस अनुपालक)	बस संचार:	हाइपरलिंक, 2,000 मीटर तक
बिजली की आपूर्ति:	स्वतंत्र आपूर्ति (आंशिक शटडाउन सहिष्णु)

प्रोडक्ट का नाम:	दीवार पर चढ़ा हुआ
क्षमता सीमा:	2.2-7.1 किलोवाट
न्यूनतम ध्वनि स्तर:	27 डीबी ((ए)
वैकल्पिक पंप हेड:	1,200 मि.मी
शीतल:	R32 निम्न GWP (GWP 675, F-गैस अनुपालक)
बस संचार:	हाइपरलिंक, 2,000 मीटर तक
बिजली की आपूर्ति:	स्वतंत्र आपूर्ति (आंशिक शटडाउन सहिष्णु)

Wall Mounted VRF Unit CE Certified Gold Fin Residential Commercial HVAC The Wall-Mounted Unit That Installs Like a Ducted One Looks Like One

Wall Mounted VRF Unit - CE Certified Gold Fin Residential Commercial HVAC

The wall-mounted unit that installs like a ducted system and looks like one, featuring 30mm top-flush mounting, 27 dB(A) sound floor, and triple-vector drainage to eliminate traditional wall-mounted compromises.

Product Overview

Wall-mounted units have historically been the "last resort" option—chosen when ceiling access is impossible and aesthetics are sacrificed for functionality. The Midea V8 Wall Mounted overturns that assumption entirely. A re-engineered heat exchanger geometry enables top-flush mounting with just 30 mm clearance from the ceiling—eliminating the unsightly gap that collects dust and undermines the room's visual continuity. The result is a wall-mounted unit that looks as intentional and integrated as a concealed ducted installation.

At 27 dB(A) minimum sound level, the unit operates below the ambient noise floor of most residential and hospitality environments—making it virtually inaudible during sleeping hours. The bidirectional Coanda effect intelligently routes air: ceiling-hugging in cooling mode to prevent cold downdrafts, and wall-following in heating mode to deliver warmth to floor level where occupants actually feel it. Combined with mmWave occupancy sensing and unrestricted drainage routing (horizontal, downward, or upward—plus optional pumped lift), this is the wall-mounted unit that designers no longer need to apologize for specifying.

As part of the V8 heat pump VRF platform, the Wall Mounted provides all-season climate control through reverse-cycle cooling and heating. Individual zone control lets each room maintain its own setpoint independently—critical for hotel VRF solutions where guest room climate control must balance comfort with energy conservation. The DC inverter compressor's variable speed operation delivers energy saving up to 40% versus conventional systems.

Core Features & Benefits

27 dB(A) Ultra-Quiet Operation

At minimum fan speed, the unit produces just 27 decibels—quieter than a whisper in a library. This acoustic benchmark makes it ideal for sleeping quarters, patient rooms, and environments where HVAC noise impacts occupant satisfaction.

30mm Top-Flush Mounting

Redesigned thermal exchange geometry eliminates the traditional 100+ mm gap between the unit top and ceiling. With only 30 mm clearance required, the unit sits visually flush against the ceiling plane—eradicating dust-collecting ledges and creating clean architectural lines.

Bidirectional Coanda Air Routing

In cooling mode, the Coanda effect adheres the air jet to the ceiling surface, preventing cold drafts from descending into occupied zones. In heating mode, the warm air stream follows the wall surface downward, naturally delivering heat to floor level where human thermal comfort is most sensitive.

mmWave Occupancy-Aware Operation

Integrated radar module detects room vacancy and autonomously transitions to energy-reduction mode; re-entry triggers immediate return to active comfort. This demand-driven approach is valuable in hotel VRF solutions and patient rooms where occupancy is intermittent.

Three-Axis 3D Air Distribution

Simultaneous automatic vertical and horizontal louver actuation creates a three-dimensional air pattern that sweeps conditioned air throughout the room volume—eliminating stagnant pockets and thermal stratification.

Unrestricted Drainage Routing

Unlike conventional wall-mounted units limited to gravity-only drainage, the V8 Wall Mounted supports horizontal, downward, and upward drain paths—plus an optional 1,200 mm high-lift pump. This eliminates major installation constraints in complex building layouts.

Fully Enclosed Acoustic Architecture

Internal components and optional pump adopt sealed enclosures that prevent sound transmission through the unit casing—directly contributing to the 27 dB(A) performance and ensuring consistent acoustic performance.

Dedicated Sleep Protocol

Sleep mode gradually modifies temperature setpoint and fan speed throughout the night cycle—optimizing thermal comfort and energy conservation during hours when occupants cannot adjust settings.

Application Scenarios

Scenario	Description
Hotel Guest Rooms	27 dB(A) preserves sleep quality; 30mm flush mount eliminates visual compromise; hotel VRF solution at its most guest-friendly
Premium Residential Suites	Residential-grade aesthetics with commercial VRF efficiency and centralized controllability
Hospital Patient Rooms	Ultra-low sound supports recovery protocols; occupancy radar automates unoccupied setbacks; hospital VRF system integration
Senior Living Quarters	Intuitive wall-level controls; Coanda heating delivers warmth at floor level for elderly comfort
Boutique Office Suites	Clean visual lines without duct infrastructure; flexible drainage adapts to partition layouts; office building VRF versatility
School Dormitories	Reliable, quiet operation for student accommodation; campus air conditioning with individual room control

Certifications & Standards

• CE Certified – Full European conformity, R32 low GWP refrigerant (GWP 675), F-Gas compliant

• Eurovent – Certified performance data for European market compliance

• TÜV SÜD – Third-party verified safety and performance standards

• SASO Certified – Saudi Arabian standards approval

• ESMA Approved – UAE standardization compliance

• GCC Standard Compliant – Gulf region deployment ready

• ISO 9001 – Quality management ensuring consistent manufacturing quality

• ISO 14001 – Environmental management system for responsible production

• ISO 45001 – Occupational health and safety standards across the product lifecycle

Technical Specifications

Parameter	Wall Mounted
Capacity Range	2.2-7.1 kW
Minimum Sound Level	27 dB(A)
Top-Flush Clearance	30 mm minimum
Air Distribution	3D (auto vertical + horizontal sweep)
Coanda Routing	Bidirectional (cooling-to-ceiling / heating-to-wall)
Occupancy Radar	mmWave (auto setback)
Drainage Paths	Horizontal / downward / upward (unrestricted)
Optional Pump Head	1,200 mm
Acoustic Design	Fully enclosed architecture
Sleep Protocol	Supported
Pump Fault Feedback	Supported
Bus Communication	HyperLink, up to 2,000 m
Power Architecture	Independent supply (partial shutdown tolerant)
Refrigerant	R32 low GWP (GWP 675, F-Gas compliant)
System Compatibility	Heat pump VRF / Heat recovery VRF
BMS Integration	Modbus RTU / BACnet compatible

System Compatibility

Compatible with all V8 series outdoor units via HyperLink arbitrary topology communication. Full BMS integration via Modbus RTU and BACnet protocols.

Tags:

वाणिज्यिक वीआरएफ प्रणाली 8-134एचपी T3 52°C पूर्ण आउटपुट IEER 9.6 चरम व्यावसायिक परिस्थितियों के लिए पीक दक्षता उच्च क्षमता प्रदर्शन

सबसे अच्छी कीमत प्राप्त करें

वीडियो

औद्योगिक वीआरएफ 8-96एचपी ईवीआई हीटिंग -30 डिग्री सेल्सियस सुपरसेंस 19-पॉइंट मॉनिटरिंग प्रेसिजन क्लाइमेट कमांड मिशन-क्रिटिकल सुविधाओं के लिए

सबसे अच्छी कीमत प्राप्त करें

वीडियो

रिमोट कंट्रोल हाँ डीसी इन्वर्टर वीआरएफ सिस्टम ऑपरेटिंग वोल्टेज 220-240V 380-415V आवृत्ति 50Hz 60Hz वाणिज्यिक भवनों के लिए आदर्श

सबसे अच्छी कीमत प्राप्त करें

वीडियो

V8 EasyFit वीआरएफ सिस्टम प्रदर्शन पर समझौता किए बिना तेजी से स्थापना के लिए डिज़ाइन किया गया है

सबसे अच्छी कीमत प्राप्त करें

वीडियो

V8 EasyFit कॉम्पैक्ट डिज़ाइन रिक्त स्थान की बचत करने वाली HVAC के लिए रेट्रोफिट परियोजनाओं को सरल डिजाइन के साथ 60% तक स्थापना श्रम लागत में कटौती

सबसे अच्छी कीमत प्राप्त करें

वीडियो

डीसी इन्वर्टर वीआरएफ

डीसी इन्वर्टर मिनी वीआरएफ

छत पैकेज इकाई

औद्योगिक पानी चिलर

एयर कूल्ड मॉड्यूलर चिलर

एफसीयू फैन कॉइल यूनिट

वाणिज्यिक एयर कंडीशनर

वाणिज्यिक एसी इकाई

फर्श पर खड़ी नलिका का प्रकार

सीसीयू कंप्रेसर कंडेनसर इकाई

वाणिज्यिक वातानुकूलन इकाई

60 हर्ट्ज अमेरिकन एयर हैंडलर

दीवार पर लगाए गए स्प्लिट यूनिट

वायु स्रोत जल हीटर

परिशुद्धता एयर कंडीशनर

Wall Mounted VRF Unit CE Certified Gold Fin Residential Commercial HVAC The Wall-Mounted Unit That Installs Like a Ducted One Looks Like One